Dedicated app is necessary for registration.
The app can be downloaded here. 

※For re-registration, please make sure to conduct step 7, 8 beforehand.

 

1
Use a smartphone to scan the QR code. After checking the Terms of Use, select "Agree" to the Terms of Use.

2

Open the door and remove the door edge cover, then press and hold the registration button to enter registration mode.

3

While the door is still opened, select "Register" while staying near the door.
If you are already registered to other digital lock(s), select the "+" symbol at the top right corner to register.

4

After that, the registration screen will appear. Please get closer to digital lock while having this screen shown.

5

Select "Allow" for Bluetooth Pairing.

6

Once the registration is completed, the connecting screen will appear. 
After 30 seconds have passed, the registration mode will end.
 

If unable to register, please check here.
 

■For re-registration, please make sure to conduct the following steps beforehand.
 

7

Please remove the Bluetooth device registration from your Apple Watch. 
Go to Settings > Bluetooth. If "FamiLock" appears in the Devices section, tap the ⓘ icon and select "Forget This Device". 
If you have registered multiple digital locks, "FamiLock" will be listed for each lock. 
Due to watchOS specifications, it is not possible to distinguish which entry corresponds to which lock. If you unpair the incorrect lock, you will need to register that digital lock again.

8

Please remove the registration on digital lock and Apple Watch. 
For how to delete Apple Watch registration, please see here.

For how to delete digital lock registration from Apple Watch, please see here.